ADP Cleaner

Strongly acidic, weakly foaming cleaner for the removal of lime and stone deposits, inorganic soiling and organic soiling such as fats, proteins and enzymes. Ensures proper and deep cleaning of concrete substrates so that Farmcoat Agricultural Coating can adhere properly. Quick and easy to apply for manual cleaning.

Recommendation for use
First clean the surface and remove loose particles. Use high pressure for this if necessary. Apply ADP Cleaner using a watering can with spray head; wear acid-resistant gloves, boots and safety goggles. Dilute with clean tap water:
• Floor consumption 1:10
• Wall consumption 1:30

Spread the solution over the substrate and leave for about 10 minutes. Do not let it dry on the surface, but remove the acid by rinsing well with water (no high pressure). Then let it dry thoroughly.

Use gloves and protective clothing. Depending on the dilution, test in advance on less visible areas and use a stronger mix as required. Take care when using on metals and painted substrates. The dosage depends on the type of contamination and processing equipment. Do not let the product dry on the substrate, but rinse off with clean tap water.