Applying a coating in an equestrian horse stable yourself

Applying Farmcoat Agricultural Coatings in an equestrian stable offers numerous benefits that improve both the living conditions of the horses and the overall durability of the stable.

Improved hygiene: Clean and disinfect a barn much more easily.

Highly resilient surface: Farmcoat Coatings can be cleaned with high pressure.

Prevents slipping: In combination with our Farmcoat Filler Anti-slip. (Not suitable in combination with metal horseshoes)

Durability: Farmcoat protects against moisture, mould, bacteria and corrosion.

Abrasion protection: An abrasion-resistant coating.

Aesthetic value: You make a good impression. This can be important when guests visit your stable.

Easier maintenance: Maintaining a coated equestrian stable is generally easier and more cost-efficient.

Order in our online shop or contact us for advice!

Agricultural Epoxy Floor Coating

High-strength, 2-component coating for agricultural floors.

Farmcoat Filler FINE (1 kg)

€1.95

Agricultural Epoxy Wall Coating

High-strength, 2-component colour coating for walls.

Benefits

chemically resistant

mechanically resilient

prevents concrete rot

emission-free

Free site visit

Are you interested in applying a feed passage coating, but still have questions? We would be happy to visit you in person to advise you on which coating system is most suitable and how to apply it. Request a no-obligation site visit now.

How long does it take to apply a coating to an equestrian stable?

Farmcoat is a two-layer floor coating consisting of a primer and a coating. Four hours after applying the primer, the coating can be applied. So you’ll be finished coating within a day. However, keep in mind that you should clean the substrate thoroughly the day before so that it can dry properly before you start coating. After applying the coating, it should be allowed to dry/cure for 12 hours. This means you will not be able to use the surface for at least a day and a half.

In what colours is the coating available?

Our coatings are offered transparent or in RAL 7001 (grey) as standard. On request and from a minimum total order of 50 kilos, you can choose any RAL or NCS colour.

Does the coating have anti-slip properties?

The coating offers a rough yet smooth finish. If you need an extra anti-slip finish, or even a very coarse anti-slip surface (for cattle to walk on), we can offer this on a customised basis.

How thick is the coating to be applied?

The feed passage coating can be applied in very thick layers. Assume that you will need up to 2 kilos per square metre. For very worn substrates, it has a levelling effect.

Is it easy to apply yourself?

Farmcoat is designed so that it can be easily applied by laymen/inexperienced persons. We supply detailed instructions with every order as standard, clearly describing the steps needed to apply the coating.

Which accessories do I need?

For anyone who will be coating, we recommend the following accessories:

• 1x large handle (25 cm)
• 2x large roller (25 cm)
• 1x small handle (10 cm)
• 2x small roller (10 cm)
• 2x brush
• 1x mixing paddle
• 1x mixing stick

Robert (29) - Dairy Farmer in Terwolde (GLD)

"A sleek and hygienic floor to work on"

Dennis – Equestrian stable - Municipality of Hellendoorn

"Fast service and flexible"

Helmus - Poultry farm – Municipality of Putten

"A beautiful work floor and easy to clean"