2-layer system in a day
Applying a coating in a dog kennel or dog boarding house yourself
Farmcoat is not only suitable for the agricultural sector. More and more owners of dog kennels or dog boarding houses are making enquiries at Farmcoat.
In dog kennels or dog boarding houses, it is obviously important to have a floor that is easy to clean. Applying Farmcoat Floor Coating ensures a seamless surface that prevents the ingress of dirt. The surface is easy to clean with a hose or even high pressure cleaner.
In addition, the surface is rough enough that dogs’ paws cannot slip on it. Depending on requirements, an anti-slip can be added. The anti-slip is rough, but you can still pull a squeegee cleanly over the floor.
Want to know more about the possibilities in your dog kennel or dog boarding house? Contact us for a no-obligation discussion!
Agricultural Epoxy Floor Coating
High-strength, 2-component coating for agricultural floors.
More infoAdd to cartBenefits
chemically resistant
mechanically resilient
prevents concrete rot
emission-free
Free site visit
Are you interested in applying a feed passage coating, but still have questions? We would be happy to visit you in person to advise you on which coating system is most suitable and how to apply it. Request a no-obligation site visit now.
Request a site visitHow long does it take to apply a coating to a dog kennel/dog boarding house?
Farmcoat is a two-layer floor coating consisting of a primer and a coating. Four hours after applying the primer, the coating can be applied. So you’ll be finished coating within a day. However, keep in mind that you should clean the substrate thoroughly the day before so that it can dry properly before you start coating. After applying the coating, it should be allowed to dry/cure for 12 hours. This means you will not be able to use the surface for at least a day and a half.In what colours is the coating available?
Our coatings are offered transparent or in RAL 7001 (grey) as standard. On request and from a minimum total order of 50 kilos, you can choose any RAL or NCS colour.Does the coating have anti-slip properties?
The coating offers a rough yet smooth finish. If you need an extra anti-slip finish, or even a very coarse anti-slip surface (for cattle to walk on), we can offer this on a customised basis.How thick is the coating to be applied?
The feed passage coating can be applied in very thick layers. Assume that you will need up to 2 kilos per square metre. For very worn substrates, it has a levelling effect.Is it easy to apply yourself?
Farmcoat is designed so that it can be easily applied by laymen/inexperienced persons. We supply detailed instructions with every order as standard, clearly describing the steps needed to apply the coating.Which accessories do I need?
For anyone who will be coating, we recommend the following accessories:- 1x large handle (25 cm)
- 2x large roller (25 cm)
- 1x small handle (10 cm)
- 2x small roller (10 cm)
- 2x brush
- 1x mixing paddle
- 1x mixing stick
Robert (29) - Dairy Farmer in Terwolde (GLD)
"A sleek and hygienic floor to work on"
ClicksDennis – Equestrian stable - Municipality of Hellendoorn
"Fast service and flexible"
ClicksHelmus - Poultry farm – Municipality of Putten
"A beautiful work floor and easy to clean"
Clicks
